Description
PRE-PACKAGED SETS OF HIGH QUALITY DRUM AND PERCUSSION MICROPHONES
Audix revolutionized drum and percussion miking by designing instrument specific microphones. With the introduction of the Fusion Series, Audix created two attractively priced packages for todays up and coming professionals.
The FP7 Drum Pack contains a combination of f2, f5 and f6 dynamic microphones and the f9 condenser for overheads. The f5 is tuned for snare drum and can be used as well for bongos, timbales, guitar cabinets and acoustic instruments; the f2 dynamic microphone is ideally suited for rack and floor toms, congas, djembe, bongos, timbales, brass and woodwind instruments. The f6, with its extended bass response, is designed for kick drum, bass cabinets, cajon and other low frequency instruments. The f9 condenser microphone is intended for cymbals and hi-hat.
Built to withstand the rigors of live stage applications, the Fusion Series microphones are also excellent for rehearsal, school, House of Worship and a wide variety of home recording applications
Applications
- All-in-one solution for drum miking
- Instrument-specific mics for optimal results
- Cost-effective
- Rugged Audix quality
- Aluminum carrying case
ver 3.0 01--117
PRODUCT REGISTRATION::
Please register your product online at
www..aaudixusa..ccom//ddocs_12//aabout//pproduct_registration..sshtml
.
SERVICE AND WARRANTY::
These microphones are under warranty for a period of 3 years to be free of defects in material and workmanship.. In the event of a product failure due to materials
or workmanship,, Audix will repair or replace said product at no charge with proof of purchase.. Audix does not pay or reimburse shipping costs for warranty repairs or returns.. The warranty excludes
any causes other than manufacturing defects,, such as normal wear,, abuse,, environmental damage,, shipping damage or failure to use or maintain the product per the supplied instructions.. No
Implied Warranties:: All implied warranties,, including but not limited to implied warranties of merchantability and ftness for a particular purpose are hereby excluded.. The liability of Audix,, if any,,
for damages relating to allegedly defective products shall be limited to the actual price paid by Dealer for such products and shall in no event include incidental or consequential damages of
any kind.. Should your microphones fail in any way,, please contact the Audix Service department at 503.682.6933.. A Return Authorization is required before returning any product.. OTHER THAN
THIS WARRANTY,, AUDIX MAKES NO WARRANTIES,, EXPRESS OR IMPLIED,, WITH RESPECT TO THE PRODUCTS,, THE USE OF THE PRODUCTS,, THE PERFORMANCE OF THE PRODUCTS.. AUDIX SHALL
NOT BE LIABLE FOR SPECIAL INCIDENTAL,, CONSEQUENTIAL,, INDIRECT OR SIMILAR DAMAGES ARISING FROM OR BASED ON THE SALE,, USE,, STORAGE OR DISPOSAL OF THE PRODUCTS,, AUDIX’S
SERVICE WORK,, BREACH OF WARRANTY,, BREACH OF CONTRACT.. NEGLIGENCE,, OR ANY OTHER THEORY OF LIABILITY,, EVEN IF AUDIX HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES..
SPECIFICATIONS
FP7
USER TIPS
The f2,, f6 and f9 microphones are supplied with the DCLIP,, a heavy
duty nylon stand adapter with snap--tto--fft design;; the f5 is supplied
with the MC1 mic clip.. Each clip comes with a 3//88”” thread adapter
which is mainly used with European mic stands..
The following are some ideas as to how the microphones in the
packs interact with each other..
Kick drum::
The f6 is the kick drum mic.. A great accessory to help
position the f6 is the STANDKD,, which is specifcally designed for
that application.. To position the f6,, a good starting point is to place
the mic inside the front hole of the kick drum,, pointing toward the
beater.. (TTip:: be sure that the grill is completely inside the hole)).. For
more attack,, move the mic closer toward the head,, making sure not
to position the mic right in front of the beater..
Snare and toms::
The f2 (ssnare)) and f5 (ttoms)) are designed to be
close miked.. A good starting point is two inches above the rim
with the mic pointing toward the center of the head.. For more “rrim””
sound,, pull the mic back closer to the rim.. For more resonance and
depth of feld,, pull the mic further away from the head.. The trick is
to fnd the right balance between resonance and controlling bleed
from the other drums..
The FP7 package
includes two f9 condensers for overhead miking.. With the addition
of the overhead mics,, you have the opportunity to create more depth of feld and
more presence within the mix.. There is a choice of using both f9’’ss for overheads,, or
one for high hat and one for overhead..
Overheads::
There are several options when placing two mics overhead.. The most
common concept is to keep the snare as the focal point and move the mics into
various left and right positions equal distance from the snare;; 4 feet is a good
starting point.. For best results,, keep the mics in a vertical position,, keeping in mind
that you are not necessarily just miking the cymbals but the whole kit.. You will need
to fnd a balance between the overhead mics and the drum mics,, some of which will
be dictated by the venue and the PA system..
One for high--hhat,, one for overhead::
The f9 for high hat should be placed 2--33
inches above the top cymbal and toward the outside edge.. The overhead mic can
be placed above the cymbals,, generally above the rack toms.. In the case where
there are more cymbals on one side of the kit than the other,, the mic can favor the
side with the most cymbals..
For more tips on miking your kit,, please refer to the Audix DVD on “HHow to Mic your
Drums”” or visit the
www..aaudixusa..ccom
.
f2
f9
f5
f6
Transducer
Dynamic
Dynamic
Dynamic
Pre--ppolarized Condenser
Frequency Response
52 Hz - 15 kHz
55 Hz - 15 kHz
40 Hz - 16 kHz
40 Hz - 20 kHz
Polar Pattern
Hypercardioid
Hypercardioid
Hypercardioid
Cardioid
Output Impedance
580 ohms
580 ohms
580 ohms
200 ohms
Sensitivity
2 mV / Pa @ 1 k
2.2 mV / Pa @ 1 k
1.2 mV / Pa @ 1 k
8 mV / Pa @ 1 k
Maximum SPL
≥1139 dB
≥1137 dB
≥1140 dB
≥1137 dB
OFF--aaxis rejection
≥220 dB
≥220 dB
≥223 dB
≥224 dB
Power Requirements
None
None
None
12 - 48 V Phantom
Materials / Finish
Zinc Alloy// Black Finish
Zinc Alloy// Black Finish
Zinc Alloy// Black Finish
Zinc Alloy// Black Finish
Weight
247 g / 8 oz
283 g / 10 oz
311 g / 11 oz
95 g / 3.3 oz
Length
104 mm / 4.09 in
145 mm / 5.7 in
121 mm / 4.76 in
111 mm / 4.37 in
