Product Overview
Thanks to the power of today’s digital technology, there are more options for attaining great reverb effects than ever before. But imagine being able to get the same washes of tone, that often emanate from some overly complicated stompbox computers, from a compact, single-button pedal with straightforward controls. That’s exactly what you’ll find with the Wampler Reflection. A flip of a switch shifts from swampy, springy goodness to a studio-grade plate reverb. Then manipulate that ambience on the fly, thanks to the intuitive control layout. And with internal switches to control the effect’s tails and dry signal, the Reflection will integrate perfectly into almost any guitar rig. So, when you’re done surfing through menus while you’re trying to perform, but you still demand pristine trails of tone, put the Wampler Reflection reverb pedal on our board and never look back.
Two reverbs in one
The spring and plate reverbs onboard the Reflection have been expertly voiced to sit as comfortably on a surf rocker’s board as they will adding subtle air in a studio environment. The spring setting faithfully replicates the boing and drip of the classic effect, while the plate places your tone in 3-dimensional spaces that add beauty and character to everything you play.
Just the right amount of control
The life of a performing guitarist doesn’t offer a lot of time for tone-tweaking on the job. That was a guiding consideration when crafting the Reflection reverb. You’re able to conjure the detailed tones with the twist of decay, tone, pre-delay, and reverb volume knobs. You’ll also find internal controls for allowing the tails to ring through and for adding or removing your guitar’s original signal.
Wampler-quality construction
Brian Wampler’s attention to detail and commitment to designing the best and most player-friendly products out there are second to none. Those qualities are on full display within the Reflection reverb. From its convenient top-mounted jacks to its top-tier components, the Reflection reverb pedal is every bit a Wampler.
- High-grade components selected for their superior sound and response
- Top-mounted jacks make pedalboard placement effortless
- Includes Wampler’s limited 5-year warranty
- See more at: https://wamplerpedals.com/products/reflection#sthash.voTZJnMJ.dpuf
Technical
- Built in the U.S.A
- 9v-18v power jack
- High-grade components selected for their superior sound and response
- 2 voicings, studio grade plate and big tank-like spring.
- Infinite Decay and up to 140ms early reflection make it as organic as possible
- Internal dip switch for true bypass/buffered to allow ‘trails’ (factory set to True Bypass)
- Internal dip switch for ‘dry kill’ that just has the reverb sounding (factory set to ‘off’)
- Top-mounted jacks make pedalboard placement effortless
- Power draw: 73.8 mA @ 9V and 77.5mA @ 18v
- Includes Wampler’s limited 5-year warranty
- 50″ x 4.50″ x 1.5″ (63.5mm x 114.3mm x 38.1mm) – height excludes knobs and switches
CUSTOMER SATISFACTION GUARANTEE. Wampler offers a 30 day no questions asked return policy on any pedal purchased through the wamplerpedals.com website. In order to satisfy the requirements for the return the pedal must have the battery inside, complete with all original packaging and all in as new condition. Please contact us via help@wamplerpedals.com to arrange (please include your order number) the return. Please note, any pedal bought through a dealer is not applicable - please refer to their specific returns policy.
WAMPLER Pedals Limited Warranty. WAMPLER offers a five (5) year warranty to the original purchaser that this WAMPLER product will be free from defects in material and workmanship. A dated sales receipt will establish coverage under this warranty. This warranty does not cover service or parts to repair damage caused by accident, neglect, normal cosmetic wear, disaster, misuse, abuse, negligence, inadequate packing or shipping procedures and service, repair or modifications to the product, which have not been authorized by WAMPLER. If this product is defective in materials or workmanship as warranted above, your sole remedy shall be repair replacement as provided below.
RETURN PROCEDURES. In the unlikely event that a defect should occur, follow the procedure outlined below. Defective products must be shipped, together with a dated sales receipt, freight pre-paid and insured directly to WAMPLER SERVICE DEPT – 3383 Gage Ave., Huntington Park, CA 90255, USA. A Return Authorization Number must be obtained from our Customer Service Department prior to shipping the product. Products must be shipped in their original packaging or its equivalent; in any case, the risk of loss or damage in transit is to be borne by the purchaser. The Returns Authorization Number must appear in large print directly below the shipping address. Always include a brief description of the defect, along with your correct return address and telephone number.
When emailing to inquire about a returned product, always refer to the Return Authorization Number. If WAMPLER determines that the unit was defective in materials or workmanship at any time during the warranty period, WAMPLER has the option or repairing or replacing the product at no additional charge, except as set forth below. All replaced parts become a property of WAMPLER. Products replaced or repaired under this warranty will be returned via ground shipping within the United States freight prepaid. WAMPLER is not responsible for costs associated with expedited shipping, either to WAMPLER or the return of the product to the customer.
INCIDENTAL OR CONSEQUENTIAL DAMAGE. In no event is WAMPLER liable for any incident or consequential damages arising out of the use or inability of the possibility of such damages, or any other claim by any other party. Some states do not allow the seclusion or limitation of consequential damages, so the above limitation and exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state.
FOR YOUR PROTECTION. Please complete the online warranty registration within (10) ten days of the date of purchase so that we may contact you directly in the event of a safety notification issued in accordance with the 1972 Consumer Product Safety Act.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantees that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experience radio/TV technician for help.
- See more at: https://wamplerpedals.com/products/reflection#sthash.voTZJnMJ.dpuf
