Product Overview

EVOX TWO-WAY ARRAYS

EVOX array design features constant horizontal directivity coverage of 120°, offering a perfect listening experience to the audience. The vertical array design is progressively shaped to guarantee a correct listening from the first row and to avoid a high frequency beaming typical of straight array

LIVE SOUND

Extensive testing with instruments and voices during the design process as well as power and reliability testing make the EVOX system the perfect workmates for solo musicians or bands.

DJS

Extremely deep response, precise low frequency control and incredible audio quality, easy to transport and quick to set up. EVOX is without any doubt a smart choice for DJs.

CONFERENCES

Extraordinary clarity and dynamic of vocal reproduction, both at low and very high levels. EVOX is a great tool for conferences and speeches.

FEATURES

1400 Watt
128 dB max SPL
40 Hz 20 kHz frequency response
12" Woofer, 2.5" v.c.
8 x 2" Ultra compact fullrange, 1.0 v.c.
120° x 30° slightly tilted pattern control
Innovative DSP processing
Pole mountable, easy set-up and transportation

ACOUSTICAL SPECIFICATIONS

Frequency Response -3 dB:40 Hz ÷ 20 Hz
Max SPL:128 dB
Horizontal coverage angle:120°
Vertical coverage angle:30°
Fullrange:8 x 2", 1.0" v.c.
Woofer:12", 2.5" v.c.

INPUT/OUTPUT SECTION

Input connectors:Jack-XLR male
Output connectors:XLR female
Input sensitivity:-2 dBu / + 4 dBu

PROCESSOR SECTION

Crossover frequencies:220 Hz
Protections:thermal, rms
Limiter:Soft limiter
Controls:Volume, EQ, phase, xover

AMPLIFIER SPECIFICATIONS

Total power:1400 W PEAK
High frequencies:400 W PEAK
Low frequencies:1000 W PEAK
Total power:700 W RMS
High frequencies:200 W RMS
Low frequencies:500 W RMS
Cooling:Convection
Connections:VDE connector

CABINET

Cabinet Material:Baltic birch plywood
Hardware:2 x M6
Handles:1 top
Pole Mount/Cap:Yes
Colour:black

PHYSICAL SPECIFICATIONS

Height:530/20.86 mm/inch
Width:346/13.62 mm/inch
Depth:459/18.10 mm/inch
Net Weight:23.8/50.70 kg/lbs

EVOX systems are driven from high power class D amplifiers. Each system features a real two way amplifiers with DSP controlled crossover. With careful crossover design and protections setting has been possible to reach pressures up to 6 dB more than traditional products with passive crossovers to satellites.

DSP PROCESSING

The EVOX 5 / EVOX 8 is powered by a 800W/1400W peak power digital amplifier, split 200W/400W for the HF and 600W/1000W for the LF. Thanks to the frequency dependent drivers excursion and control of distortion, our processing is capable to guarantee an incredible and unmatchable output from this small systems. A dedicated vocal processing has been specifically studied for speech reproduction during presentations or conferences.

INPUT / LINK

MAIN XLR INPUT (BAL/UNBAL). The system accept female XLR input connectors and line level signals from a mixing console or other signal source.

LINK XLR OUTPUT. The output XLR male connector provides a loop trough for speakers daisy chaining.

VOLUME KNOB

Controls the volume of the power amplifier. The control ranges from - (maximum attenuation) to the MAX level (maximum output).

STATUS INDICATORS

POWER INDICATOR. Power on indicator. When the power cord is connected and the power switch is turned on this indicator lights green.

SIGNAL INDICATOR. The signal indicator lights green if there is signal present on the main XLR input.

LIMITER INDICATOR. The amplifier has a built in limiter circuit to prevent clipping of the amplifiers or overdriving the transducers. When the peak clipping circuit is active the LED blinks orange. It is okay if the limit LED blinks occasionally. If the LED blinks frequently or lights continuously, turn down the signal level. The amplifier has a built in RMS limiter. If the RMS limiter is active the LED lights red. The RMS limiter has the purpose to prevent damages the transducers. The speaker shall never be used with the limit indicator red, continuous operation with the RMS protection active can cause damages to the speaker.

EQ SWITCH

“Boost” equalization is a loudness recommended for background music applications, when the system plays at a low level or when two systems are coupled. For all other applications “Flat” equalisation is recommended.

MIC/LINE SWITCH

A useful Mic/Line switch to adjust the input sensitivity is provided. When used just for speech, the Mic setting allows to use a microphone directly with the speaker. Set the selector to Line when using the speaker for live music or playback.

SPEAKON PANEL

SPEAKON RECEPTACLE.
The EVOX uses a SPEAKON locking 2-pole to link power from sub to satellite. Always use the specific power cord provided in the package.