dB Technologies IG1T INGENIA 2-Way Active Speakers (2 x 6.5")

The INGENIA IG1 T is equipped with 2 premium low frequency transducers and 1 1"compression driver. 

 

All models of the series are designed to work individually, but they can also be coupled by simply turning one speaker upside down and placing it upon the other one.

 

Thanks to infrared technology, INGENIA detects the presence of a second speaker, and an onboard-configuration wizard automatically sets up the system in order to ensure the best coverage and acoustic coherence. 

 

INGENIA’s horn design is horizontally symmetric and vertically asymmetric: this way, horizontal dispersion is wide and constant while vertical dispersion is narrow in the upper part and wider in the lower part. Thanks to such feature, when 2 Ingenias are coupled high frequencies add up avoiding any interferences. In addition to that, a sophisticated digital steering function process each way of the speaker in order to adjust the dispersion without moving the box. As a result, the whole audience enjoys a perfect intelligibility.

 

Users can easily control the system through an intuitive OLED display. In fact, behind the simple interface runs a cutting-edge processing which manages mix, coverage steering, EQs  levels and imput devices.

 

.INGENIA can be easily and safely coupled through a  LP-IG accessory  which fits all the 4 INGENIA models. Moreover, feet and recessions on the top and the bottom of the enclosure ensure the speakers to be perfectly aligned, avoiding any incorrect setup operation.

 

Ingenia DRK-IG flybar adapts to all the speakers of the series allowing to fly coupled speakers in a vertical array. 

• WORK AS STAND-ALONE SYSTEM OR IN COUPLE
• CEC HORN TECHNOLOGY (ASYMMETRICAL VERTICAL COVERAGE)
• DIGITAL STEERING COVERAGE
• ELEMENT POSITION DETECTION (IR PORT)
• SPEAKERS WITH NEODYMIUM MAGNETS
• OLED DSP INTERFACE
• UNIQUE SPEAKER LOCK SYSTEM
  Technical Data

  Speaker Type 

  2-Way Active Speaker
  Acoustical data

  Frequency Response [-10dB]

  85 - 20.000 Hz

  Frequency Response [-6dB]

  92 - 19.200 Hz

  Max SPL

  128 dB

  HF

  1"

  HF Voice Coil

  1.4"

  Directivity (HxV)

  100 x 80° (+15°/- 65°)

  HF Type

  Neodymium compression driver

  Horn

  Vertical asymmetric

  Crossover Frequency

  2100 Hz

  LF

  2x6.5”

  LF Voice Coil

  1.5"

  LF Type

  Neodymium
  Amplifier

  Amp Technology

  Digipro® G3

  Amp Class

  Class-D

  Peak Power

  800 W

  RMS Power

  400 W

  User Interface

  OLED display + rotative knob w/switch

  Self-rotating display

  Yes

  Positioning

  EPD (Element Position Detection)

  Display Mirroring

  Yes
  Processor

  Controller

  DSP 56 bit

  AD/DA Converter

  24bit/48kHz

  System Presets

  Factory presets + User defined

  Limiter

  Dual Active Peak, RMS, Thermal
  Input

  Signal Input

  1 x Combo IN (XLR + Jack 6.3mm)

  Signal Out

  1 x XLR link OUT

  USB connector

  Yes - mini USB
  Mechanics

  Housing

  Polypropylene PP reinforced

  Grille

  FULL /Invisible screws

  Flyable

  Yes

  Handles

  1x on top / 1x on bottom

  Pole Mount

  Yes

  Width

  195 mm (7.68 in)

  Height

  536 mm (21.10 in)

  Depth

  271 mm (10.67 in)

  Weight

  10.6Kg (23.37 lbs.)
  Notes: The data are not binding; dBTechnologies reserves the right to modify the data at any time and without previous notice.