MSRP: $939.00
The Yamaha TransAcoustic guitar recreates an incredible experience without needing any external amplification or effects, just the guitar itself. With built-in reverb and chorus at your fingertips, it's the most inspiring, engaging acoustic guitar you'll ever play.
- Traditional western body
- Solid spruce top
- Mahogany back and sides
- Amazing sounding reverb/chorus built into the guitar with no need for external amplification or effects
- New scalloped bracing for louder, richer acoustic sound
Find a StoreFeatures
Actuator
An actuator installed on the inner surface of the guitar back vibrates in response to the vibrations of the strings. The vibrations of the actuator are then conveyed to the body of the guitar, and to the air in and around the guitar body, generating authentic reverb and chorus sounds from inside the body.
Simple Controls
Three simple knobs let you adjust your amount of effects and the line out volume level. By keeping the controls small, it minimizes the area of the holes in the body material, reducing acoustic sound loss.
(A) Chorus Control
(B) Reverb Control (Room / Hall)
(C) TA Switch / Line Out Volume Control
* Pressing the TA Switch for more than 0.3 seconds activates the TA function.
* When a cable is connected to the line out jack, the line out volume can be adjusted by rotating the (C) knob.
* The reverb type switches from Room to Hall around the 12:00 position.
Designed to Provide Superb Acoustic Guitar Sound
The body is a solid spruce top with mahogany back and sides guitar based on the FG-series.
Louder and stronger sound in the low- to mid-ranges, thanks to cutting-edge acoustic analysis technology developed by the Yamaha R&D Division and a newly-designed scalloped bracing pattern.
Newly-Designed Battery Box
The battery box is now integrated into the end-pin jack. This requires fewer holes in the body and reduces acoustic sound loss. It can also be connected to a PA or amp for use as an acoustic electric guitar.
FS-TAFG-TAGeneral Specifications Body Shape Concert Traditional Western Scale Length 25 " (634 mm) 25 9/16 " (650 mm) Body Length 19 9/16 " (497 mm) 19 7/8 " (505 mm) Total Length 40 3/16 " (1021 mm) 40 7/8 " (1038 mm) Body Width 14 15/16 " (380 mm) 16 1/4 " (412 mm) Body Depth 3 9/16 " - 4 5/16 " (90-110 mm) 3 15/16 " - 4 5/8 " (100-118 mm) Nut Width 1 11/16 " (43 mm) 1 11/16 " (43 mm) String Spacing * 0.39 " (10.0 mm) 0.43 " (11.0 mm) Top Material Solid Spruce Solid Spruce Back Material Mahogany Mahogany Side Material Mahogany Mahogany Neck Material Nato Nato Fingerboard Material Rosewood Rosewood Fingerboard Radius 15 3/4 " (R400 mm) 15 3/4 " (R400 mm) Bridge Material Rosewood Rosewood Nut Material Urea Urea Saddle Material Urea Urea Bridge Pins Black ABS with White Dot Black ABS with White Dot Tuners Die-Cast Chrome(TM29T) Die-Cast Chrome(TM29T) Body Binding Cream Cream Soundhole Inlay Black + White Black + White Pickguard Transparent Transparent Body Finish Gloss Gloss Neck Finish Matte Matte Electronics SYSTEM70 TransAcoustic + SRT Piezo Pickup SYSTEM70 TransAcoustic + SRT Piezo Pickup Controls Reverb / Chorus / TA Switch / Line Out Vol Reverb / Chorus / TA Switch / Line Out Vol Connections Line Out Line Out Strings Yamaha FS50BT or D'Addario EXP11 Yamaha FS50BT or D'Addario EXP11 Accessories Hex Wrench, 2 x AA Batteries Hex Wrench, 2 x AA Batteries Case None None
